The reason why the customized metal cutting disc is used to polish the hot plate

The grinding wheel can achieve the cutting angle when polishing the workpiece, ensure the synchronous consumption of the substrate and the mat of the abrasive cloth wheel, obviously improve the overall wear resistance and grinding efficiency of the flat abrasive cloth wheel, and prolong the service life of the abrasive cloth wheel. Then the reasons for the China cutting disc for metal to polish the hot plate are: First, when polishing, the strength used is too large, because the use of your strength is different, the effect of polishing is not the same, so the effect is not the same when used, so it should be properly controlled to polish The strength. Second, the chuck of the grinding machine is not locked or the slip caused by the failure of the grinding wheel is unqualified, so the quality of the grinding wheel must be checked before use, or the mechanical device, or the grinding wheel or Relock. Through the above introduction, we have learned the reason why the grinding wheel is slipping when the hot plate is polished. Therefore, we must use it well when using it. When the grinding wheel is used to polish the hot plate, we can solve the problem according to the above reasons.