Vibration is the enemy of trimming

In the dressing of the grinding wheel, it is essential to effectively reduce the vibration, avoid leaving traces on the surface of the grinding wheel, colliding and damaging the dressing tool. This means that the balance of the grinding wheel must also be maintained, which is determined by the structural characteristics of the grinding wheel itself. The uneven density and the geometry of the entire grinding wheel will affect the inherent balance of a grinding wheel. Therefore, it is also important to choose a high quality grinding wheel. 7'' cut off disc for metalIf it is a high-quality grinding wheel, it can maintain a good balance of the grinding wheel with proper installation. According to the manufacturer's instructions from the grinding wheel manufacturer, the grinding wheel is marked with an upward arrow indicating the light end orientation of the grinding wheel after rough balancing. The user can then follow the arrows to pay attention to the dressing wheel to achieve dynamic balance. The coolant is evenly filled and sometimes helps the wheel to maintain balance.

In order to further avoid vibration, it is necessary to ensure that the dressing tool is firmly clamped on the holder and maintain a minimum amount of overhang to ensure sufficient rigidity of the dressing tool. If the diamond tool is not firmly clamped, it will cause vibration, noise, ripples on the surface of the part, strain the surface of the part and damage the dressing tool. A super-hard abrasive wheel must be shaped and sharpened before it begins to grind. Following the experience presented in this article will help your grinding wheel produce the most abrasive results. What is the feature? People have no me, people have me What is innovation? I don’t want others, I don’t want others to do it.